MATERIAL SAFETY DATA SHEET
![]() |
|
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT DESCRIPTION: Silicone Based Tire Dressing
PRODUCT CODE: 61
PRODUCT FORMULATION NAME: Dress-It Right
GENERIC NAME: Dressing
| MANUFACTURER | 24 HR. EMERGENCY TELEPHONE NUMBERS | |
|---|---|---|
Auto Wax Company, Inc. |
|
|
COMMENTS: To the best of our knowledge, this Material Safety Data Sheet conforms to the requirements of US OSHA 29 CFR 1910.1200.
2. COMPOSITION / INFORMATION ON INGREDIENTS
COMMENTS: This product contains no Hazardous Ingredients as defined by 29 CFR 1910.1200
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
IMMEDIATE CONCERNS: May cause a slip hazard if material gets on floor.
POTENTIAL HEALTH EFFECTS
EYES: May be irritating to the eyes.
SKIN: May cause slight irritation.
INGESTION: May be irritating to mouth, throat and stomach.
INHALATION: Prolonged inhalation may be harmful.
MEDICAL CONDITIONS AGGRAVATED: not established
ROUTES OF ENTRY: include skin contact, eye contact and ingestion
TARGET ORGAN STATEMENT: not established
CANCER STATEMENT: not established
PHYSICAL HAZARDS: Solutions extremely slippery when spilled.
4. FIRST AID MEASURES
EYES: Flush eye with water for 15 minutes. Seek medical attention if irritation persists.
SKIN: Wash with soap and water.
INGESTION: If swallowed, induce vomiting . Get medical attention immediately.
INHALATION: Move to fresh air
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: none
AUTOIGNITION TEMPERATURE: none
EXTINGUISHING MEDIA: use water, foam, dry chemical or cabon dioxide extinguisher
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Contain and collect with absorbent
LARGE SPILL: LARGE SPILLS: Shut off leak if safe to do so. Contain material to avoid run off and collect spill with absorbent.
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Avoid runoff into storm sewers and ditches which lead to waterways.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Keep out of reach of Children.
STORAGE TEMPERATURE: 0°C (32°F) minimum to 50°C (122°F) maximum
SHELF LIFE: one year
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Good general ventilation should be sufficient to control airborne levels.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields or goggles.
SKIN: Use Nitrile/ Vinyl gloves
PROTECTIVE CLOTHING: Clean, body-covering clothing
9. PHYSICAL AND CHEMICAL PROPERTIES
ODOR: none
APPEARANCE: White Liquid
pH: ~ 6 to 9
SPECIFIC GRAVITY: ~ 1 gm/ml
10. STABILITY AND REACTIVITY
STABLE: YES
HAZARDOUS POLYMERIZATION: NO
11. TOXICOLOGICAL INFORMATION
SENSITIZATION: not established
CARCINOGENICITY:
IARC: Listed by IARC- NO
NTP: Listed by NTP- NO
OSHA: Listed by OSHA- NO
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: not available
ECOTOXICOLOGICAL INFORMATION: not available
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose in accordance with local, state, and federal laws.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
OTHER SHIPPING INFORMATION: Refer to bill of lading or container label for DOT or other transportation hazard classification, if any.
15. REGULATORY INFORMATION
16. OTHER INFORMATION
PREPARED BY: Barry Brown
REVISION SUMMARY New MSDS
|
| |||||||||||||||||||||||||||||||||||||||||
MANUFACTURER DISCLAIMER: The information in this MSDS was obtained from current and reputable sources. However, the data is provided without any warranty, express or implied, regarding its correctness or accuracy. It is the user's responsibility both to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product.