MATERIAL SAFETY DATA SHEET

	Date-Issued:   11/30/2004 MSDS Ref. No:   10077V Date-Revised:   02/17/2005 Revision No:   2
BC-1 Clear Coat Cleaner™

1. PRODUCT AND COMPANY IDENTIFICATION

2. COMPOSITION / INFORMATION ON INGREDIENTS

3. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

PHYSICAL APPEARANCE: Pale Blue Liquid

IMMEDIATE CONCERNS: Harmful if swallowed.

POTENTIAL HEALTH EFFECTS

EYES: May be irritating to the eyes.

SKIN: May cause slight irritation.

INGESTION: Harmful if swallowed.

INHALATION: No hazard in normal industrial use.

SIGNS AND SYMPTOMS OF OVEREXPOSURE

EYES: Redding & burning sensation

SKIN: Repeated or prolonged skin contact may cause redness and irritation.

INGESTION: Ingestion may cause nausea and irritation.

CHRONIC: not available

ROUTES OF ENTRY: include skin contact, eye contact and ingestion

4. FIRST AID MEASURES

EYES: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists.

SKIN: Wash with soap and water.

INGESTION: Do not induce vomiting. Seek medical attention immediately.

INHALATION: Move to fresh air

5. FIRE FIGHTING MEASURES

FLASHPOINT AND METHOD: ~  40°C (104°F)

FLAMMABLE CLASS: Material will not support combustion.

EXTINGUISHING MEDIA: use water, foam, dry chemical or cabon dioxide extinguisher

HAZARDOUS COMBUSTION PRODUCTS: Carbon Monoxide and Carbon Dioxide

AUTOIGNITION TEMPERATURE: not available

SENSITIVE TO STATIC DISCHARGE: not available

SENSITIVITY TO IMPACT: not available

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILL: Contain and collect with absorbent

LARGE SPILL: LARGE SPILLS: Shut off leak if safe to do so. Contain material to avoid run off and collect spill with absorbent.

ENVIRONMENTAL PRECAUTIONS

WATER SPILL: Avoid runoff into storm sewers and ditches which lead to waterways.

7. HANDLING AND STORAGE

GENERAL PROCEDURES: Keep out of reach of Children.

STORAGE: Do not allow to freeze

STORAGE TEMPERATURE: (35°F) minimum to (95°F) maximum

SHELF LIFE: one year

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE GUIDELINES:

OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)

		EXPOSURE LIMITS
Chemical Name		OSHA PEL		ACGIH TLV		Supplier OEL
		ppm	mg/m3	ppm	mg/m3	ppm	mg/m3
Distillates (petroleum) hydrotreated light	TWA					300 ppm	2300 mg/m3
Naphtha	TWA	300 ppm		300 ppm
	STEL			400 ppm

PERSONAL PROTECTIVE EQUIPMENT

EYES AND FACE: Wear safety glasses with side shields or goggles.

SKIN: Use Nitrile/ Vinyl gloves

RESPIRATORY: NIOSH respirator - in absence of proper environmental controls.

PROTECTIVE CLOTHING: Clean, body-covering clothing

9. PHYSICAL AND CHEMICAL PROPERTIES

10. STABILITY AND REACTIVITY

STABLE: YES

HAZARDOUS POLYMERIZATION: NO

CONDITIONS TO AVOID: Avoid high temperatures.

11. TOXICOLOGICAL INFORMATION

ACUTE

not available

SENSITIZATION: not available

TARGET ORGANS: not available

SUBCHRONIC: not available

CHRONIC: not available

CARCINOGENICITY:

IARC: Listed by IARC- NO

NTP: Listed by NTP- NO

OSHA: Listed by OSHA- NO

MUTAGENICITY: not available

REPRODUCTIVE EFFECTS: not available

NEUROTOXICITY: not available

12. ECOLOGICAL INFORMATION

ENVIRONMENTAL DATA: not available

ECOTOXICOLOGICAL INFORMATION: not available

13. DISPOSAL CONSIDERATIONS

DISPOSAL METHOD: Dispose in accordance with local, state, and federal laws.

14. TRANSPORT INFORMATION

DOT (DEPARTMENT OF TRANSPORTATION)

PROPER SHIPPING NAME: NOT REGULATED

OTHER SHIPPING INFORMATION: Not dangerous material according to CFR49 regulations

15. REGULATORY INFORMATION

CANADA

WHMIS HAZARD SYMBOL AND CLASSIFICATION

WHMIS Combustible Liquid

WHMIS Toxic

16. OTHER INFORMATION

PREPARED BY: Mark Dean

REVISION SUMMARY Revision #: 2 This MSDS replaces the January 12, 2005 MSDS. Any changes in information are as follows: In Section 1 Product Code

MANUFACTURER DISCLAIMER: The statements made here should describe the product with regard to the necessary safety precautions- they are not meant to guarantee definite characteristics - but they are based on our present up-to-date knowledge. No responsibility.