Product Technical Bulletin
|PRODUCT NAME: #78 BC-2®||
|PRODUCT CATEGORY: Waxes, Glazes & Compounds
PRODUCT DESCRIPTION: BC-2® Basecoat/Clearcoat Finish is the second step in reviving the original beauty to clearcoat and conventional paint finishes. May be applied by hand, orbital buffer, or variable speed polisher. Works well with wool or foam pads.
DIRECTIONS: Shake well. For hand application, use a wax applicator in overlapping, circular motions. Allow to haze, then remove with a soft, terry towel. For machine application, apply to a small area and buff to desired shine. Remove excess with a soft, terry towel.
ONLINE AVAILABLE SIZE: 16 oz. (additional sizes available through your local Auto Magic® distributor. Call 800-826-0828 or click here for more information)
SURFACE APPLICATIONS: For use on all types of clearcoat, acrylic, enamel, lacquer, and single-stage paints.
RECOMMENDED USE: Use 1,400 to 2,400 rpm when polishing with a wool pad to remove medium scratches and/or light oxidation. Use 1,400 rpm to 1,600 rpm when finishing with foam pads.
ADDITIONAL USES: BC-2 also works great for hand waxing paint and chrome.
HELPFUL TIPS: Mist #49-Body Shine® to the painted surface to increase shine and reduce swirls while buffing. This also aids in quick and easy clean-up. Apply enough product between the pad and the paint to keep it "wet" while buffing. Additionally, keep the buff pad as flat as possible.
ABRASIVE METER: The Auto Magic®
Abrasive Meter is an exclusive quick reference guide to the aggressive
nature of products in the Waxes, Glazes & Compounds category. Products
listed in the green area are mostly waxes or sealants and are not
aggressive. Products in the yellow area contain mild abrasives. Compounds
are the most abrasive and are located in the red zone.
|©2006 Auto Wax Company, 1275 Round Table Drive, Dallas, Texas 75247 800-826-0828|
Product Training Bulletin